Important à lire absolument / Important must read

Nous vous informons que les inscriptions sont définitivement désactivées sur ce forum www.autohacking.net
* Pour toute nouvelle inscription, merci de vous inscrire sur le nouveau forum www.motorcarsoft.com
Cliquez ici pour vous inscrire à motorcarsoft.com Image https://www.motorcarsoft.com/viewtopic.php?f=77&t=296

We inform you that registrations are permanently disabled on this forum www.autohacking.net
* For any new registration, please register on the new forum www.motorcarsoft.com
Click here to register at motorcarsoft.com Image https://www.motorcarsoft.com/viewtopic.php?f=77&t=296

Sdconnect C4 Network

Comment télécharger? How to download?
Cliquez ici / Click here Image viewtopic.php?f=77&t=1294
Règles du forum
Comment télécharger? How to download?
Cliquez ici / Click here Image viewtopic.php?f=77&t=1294
Répondre
Avatar du membre
rgmaster3
Capitaine Barberousse - Captain Redbeard
Capitaine Barberousse - Captain Redbeard
Messages : 9222
Enregistré le : ven. 29 sept. 2017 21:51
Réputation : 925
Localisation : Pirates Island
    Windows 8.1 Chrome
A remercié : 561 fois
A été remercié : 1297 fois
Sexe :
Zodiaque : Taureau
Contact :

Sdconnect C4 Network

Message par rgmaster3 » jeu. 9 janv. 2020 09:18

Lan_IP_set to C4.JPG
RoAHConC4.exe
Wirless_IP_set to C4.JPG
WoHoConC4v1-1.exe

To save an ad-hoc network and its network key on the guest computer (running Windows 7)
Note down the SSID, security type, encryption type and the key of the ad-hoc network.
Disconnect your connection to any wireless network and switch off/disable your wireless device. Turn
on/enable your wireless device but don't connect to any network. (Thanks GK.)
Click on the network icon in the taskbar.
Click Open Network and Sharing Center > Manage Wireless Networks > Add.
Click "Manually create a network profile". (This may look silly but we really are going to create an
infrastructure network now.)
Enter the network name (SSID), security type, encryption type (if any) and the key that you noted in step
1.
Uncheck both checkboxes ("Start this connection automatically" and "Connect even if the network is not
broadcasting".) [Note that you cannot have the connection start automatically. If you try to have it
checked, step 10 will fail. A different way to start it automatically during system boot is described below.]
Click Next > Close. Your connection must appear in the list with the icon suggesting infrastructure (two
big screens connected to a tube). Don't worry about it.
Click Start, type in "cmd" in the search box, press Enter.
In the Command Prompt, type in "netsh wlan set profileparameter name=NetworkName
ConnectionType=IBSS", exactly as shown, without quotes, except you must substitute NetworkName
with the SSID (network name) of your ad-hoc network.
If everything went well, you'll see that the icon has now changed to an ad-hoc icon (three small screens
connected to each other) in the Manage Wireless Networks window.
Turn on/enable your wireless device, and try connecting to the Ad-hoc network. You will notice that you
no longer need to enter the network key.
To automatically connect to a saved ad-hoc network during Windows boot (can be applied to both guest
and host computers running Windows 7)
Click Start > point to All Programs > right-click Startup > click Open. (You may choose Open All Users
instead if you prefer).
Right-click an empty space and click New > Shortcut.
Type in "netsh wlan connect NetworkName". Once again, NetworkName must be substituted with the
SSID of your ad-hoc network.
Click Next and enter a fancy name such as "Connect to NetworkName" or something like that.
Click Finish and you're done. This shortcut will run when Windows starts up, giving you a very brief flash
of the black command window, followed by your computer connecting to the ad-hoc network if it is
available. Tip: You can also pin the shortcut in your taskbar or copy it to the desktop to easily connect to
the network any time you want.
Note: You will probably need Administrator access to complete some of the steps above (in both
procedures).

Section téléchargement, voir en bas de cette page
Download section, see bottom of this page

Télécharger-Download.txt
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.


Barbaresques https://fr.wikipedia.org/wiki/Barbaresques

Image
Comment télécharger? / How to download ?
Image viewtopic.php?f=77&t=1294
Image
Recherche un programme par mots-clés / Search a program by keywords
Image search.php
Image
Comment s'enregistrer sur le forum ?
How to register on the forum ?
Image viewtopic.php?f=77&t=296
Image
Signaler un téléchargement ou une vidéo corrompu
Report a corrupted download or video
Image posting.php?mode=post&f=125

Répondre

100 derniers membres ayant consulté ce sujet

Avatar du membre man, maxipsp56, scorpion4x4, Avatar du membre rgmaster3

Retourner vers « Mercedes-Benz / Logiciels de Diagnostique »

cron