No internet required. No limits for any operation.
Free equivalent of MUT-III (partially) and Etacs Decoder.
Support all vehicles, where present ETACS starting 8637A313 and furhter. (including some Peugeot/Citroen models)
Support all J2534-compatible adapters (tested on Toyota Mini-VCI, OpenPort 2.0) and true ELM327 (USB/Bluetooth) 1.5
Please, use google translate or similar. Translations will be added later.
1. Change variant coding
2. Change custom coding
3. Change coding in Engine ECU .
4. SAS calibration / G-sensor calibration.
5. Read/erase DTCs.
6. Turn on/off seatbelt reminder on dash (not working on 8100B900 and later).
7. Read/adapt RLS.
8. Erase engine adapts.
9. Change VIN in ETACS and engine.
10. Read errors history with ODO at DTC.
11. Change service reminder
12. Read A/C system pressure
13. Change Immo PIN (soon)
To edit saved coding files use MUT Coding Mitsubishi tool.
Vehicles:
Lancer X, Outlander 3, Outlander XL, L200 2016+, Pajero sport 2016+, ASX, Delica D5, Citroen C-Crosser, Peugeot 4007.
Adapters:
Toyota Mini-VCI
Scanmatik 2
OpenPort 2.0
Chipsoft J2534 lite
VAG K + CAN Commander with vdiag.net driver
UCDS
(Any J2534 compatible adapters are supported)
ELM327 Bluetooth 1.5
ELM327 USB 1.5
ELS27
Téléchargez les fichiers joints, voir en bas de cette page
Download the attached files, see at the bottom of this page
Vous êtes un visiteur? Comment s'inscrire sur ce forum
You are a visitor? How to register on this forum
Cliquez ici / Click here
viewtopic.php?f=77&t=296
