* For diagnosis, you will need a VCI2 or VCI3 adapter
Year / Release Date: 2019
Version: 2.41.1 Multilingual
Fix included
Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
The program is designed to ensure the operation of the electrical system in the CAN network.
The program is used for troubleshooting, setting parameters preferred by the client, performing calibrations, performing upgrades that affect the electrical system, and updating the software of the control units.
Installation:
1. Install Adobe Reader from the Adobe website.
2. Run as administrator 1.cmd. Press any key. To restart a computer. (Test Mode will always be written on the desktop now)
3. Install Scania Diagnos & Programmer 3 2.41.1
4. After finishing, from the folder corresponding to your Windows (x32 or x64) run _install.exe. Agree to install an unsafe driver.
5. Run Hardware ID Reader.exe and copy the code.
6. Run Protection REG.exe -> Paste the copied code into the Fingerprint field -> Click Decode Fingerprint -> Generate. A file with the extension .reg
(register data) will appear in the distribution folder. We launch it and
confirm the message.
7. Copy two files from the Fix2.41.1 folder to the folder with the installed program.
8. Run Time.exe and click the Patch button.
9. Reboot the computer.
10. You can use it!
* To upgrade from the previous version, we only perform steps 3 and 7.
* If an error occurs during installation, uninstall Kvaser Can Driver WHCP and repeat step 3.
* Add. Information: Performance tested on Windows 7 64 bit.
Download section, see bottom of this page
Mega server link
