KESS V2 Firmware 4.036 + K-TAG Firmware 6.070
Win | 218 MB
OBD tuning tool
KESSv2 allows you to read and write the ECUs of cars, bikes, trucks, tractors and boats simply connecting the tool to the diagnostic port.
Universal ECU Interface
K-TAG is used to read and write the ECU while on the bench: Each of the microprocessor, EEPROM, and flash memory can be accessed by connecting the tool to the ECU board.
Homepage:
http://www.kessv2-alientech.com
http://www.ktag-alientech.com
Requirements:
- O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
- CPU: Pentium/Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 500 MB of available space
- CD-ROM
Download section, see bottom of this page
