ChipLoader Program is designed to read / write FLASH and EEPROM memory of Car ECM, Full 1.97.7 Chiploader ECM FLASH EEPROM Tool
Paying attention: The download will be send out by Email, We just offer software download, and if you have any question when installing or using software, we can't help you.
List:
January-5.x;
January-7.2;
VS-5.1;
Bosch M7.9.7, M7.9.7+;
Micahs-7.1;
Micahs-7.6;
Bosch ME 7.1;
Bosch ME 7.5;
As well as read / write FLASH memory of the following ECM:
Micahs-10.3 (possibly read / write via diagnostic connector);
Micahs-10.3 + (Micahs-11) (possibly read / write via diagnostic connector);
Bosch ME 7.5.10;
Микас-11 (автомобили ГАЗ);
VS-8;
January-7.2 +;
Kefico M 7.9.7;
Bosch M 7.9.8 (Kia, Hyundai);
Bosch ME 7.9.7;
Bosch ME 7.9.9 (Chevrolet Captiva);
Bosch MP-7.0 (read / write field calibrations, the record FullFlash ECU);
Siemens 5WY SIMK41, SIMK43 (2 razaema, cars, KIA, Hyundai)
Siemens 5WY SIMK31 (2 razaema, car Chery QQ)
Siemens 5WY (5 razaemov, cars, KIA, Hyundai)
Siemens EMS 3132 (автомобили Renault, Dacia)
Siemens MS43 (автомобили BMW)
Sirius (автомобили Daewoo, Chevrolet)
The above ECU installed on cars VAZ, GAZ, Daewoo Sens, Daewoo Lanos 1.4, ZAZ, Daewoo, Chevrolet, Hyundai, Kia, Chery, Geely, Renault, Dacia, Volkswagen, Audi, Skoda, Seat, BMW.
Key Features:
Function to add software protection against readout (only for the computer in January-5.x, VS-5.1).
Read / write dual-mode software (for the ECU, which support this feature).
Function of removing the immobilizer (ECU only for January-5.x, VS-5.1).
Translation of the computer in diagnostic mode with the ability to automatically start the diagnostic program.
Working with custom database files.
The ability to integrate into the program ChipExplorer.
Opportunity to extend the functionality by using plug-ins.
Working with different formats firmware.
Function testirovaniya K-Line adapter.
The program is adapted to work on netbooks.
Enhanced functionality through the use of external plug-ins:
Restore the computer memory EEPROM dump Micahs-6.7
Copy information IMMO ECU Siemens 5WY, Sirius, Siemens EMS 3132
Determine the version of software (for ECU family in January-5.x, VS-1, Micahs-7.x)
The program works with standard K-Line Adapter (as COM, or USB), which is not supplied, and can be purchased separately.
INSTRUCTIONS:
Activation for ChipLoader 1.97.7. Activated both XP and Windows 7
1. Send this file chipldr1977.exe to the desk and run it there. It ll create a Chiloader folder in programme file directory
2. run activate cl_activate_197_0E391A4A6076D45A.exe
3. GetHardwareID_NoRing0.exe run and copy number
4. Send all those files from Чиплоадер_1977KeyGenEXE folder, to the desktop and start WLGen_chip197.7 License Manager.Zhmem add license,
in the field of customer, company, hardware ID, Custom Data insert is
that copying of GetHardwareID_NoRing0.exe and click Save,
then click Create License Key .
It ll create a folder called: NAME-COMPANY on the desk. That folder includ DynSmartKey.txt, licence.reg, licence.txt, regkey_c1977f and SmartKey.txt file.
(if in the 5th step you will come out error
then in the field of customer, company pishim any words in the hardware ID is inserted,
that copying of GetHardwareID_NoRing0.exe, a Custom Data also pishim any word.)
Close the window. In WLGen_chip197.7 go in Password manager.
Click Add.
In the field of Customer, Details paste it
that copying of GetHardwareID_NoRing0.exe and click OK.
Click on Generate Password. Close the window
5.Copy regkey_c1977.dat And chip197_7_Loader.exe in the folder with a
program and run chip197_7_Loader.exe. Insert the name and password of
Passwords, which we have created.
6.Program always run through chip197_7_Loader.exe
Download section, see bottom of this page
