Afin de vérifier et paramétrer (maj. firmware, ports USB, Bluetooth, test hard/soft, etc.…) son interface sans connexion sur le véhicule, voici moyennant quelques composants, un petit tuto pour l’alimentation via la prise male de toute interface de diagnostique automobile.
Schéma prise diagnostique femelle
Broche OBD male
Exemples de composants nécessaires :
2 cosses femelles de 2.8mm
Ou 2 pinces crocodile.
Une alimentation 12Vcc ≥0,5A, via bloc secteur ou batterie ou même jeu piles.
L’alimentation de l’interface se fait via les broches 4 (-) et 16 (+), optionnellement la broche 5 (masse électronique), peut être aussi reliée à la broche 4. Pour ce faire, lancer le logiciel et mettre sous tension l’interface pour effectuer les différents paramétrages comme si vous étiez dans votre véhicule.
Prendre soin d’isoler les cosses avec de la gaine thermo, ou autre ruban adhésif.
Important à lire absolument / Important must read
Nous vous informons que les inscriptions sont définitivement désactivées sur ce forum www.autohacking.net
* Pour toute nouvelle inscription, merci de vous inscrire sur le nouveau forum www.motorcarsoft.com
Cliquez ici pour vous inscrire à motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
We inform you that registrations are permanently disabled on this forum www.autohacking.net
* For any new registration, please register on the new forum www.motorcarsoft.com
Click here to register at motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
Nous vous informons que les inscriptions sont définitivement désactivées sur ce forum www.autohacking.net
* Pour toute nouvelle inscription, merci de vous inscrire sur le nouveau forum www.motorcarsoft.com
Cliquez ici pour vous inscrire à motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
We inform you that registrations are permanently disabled on this forum www.autohacking.net
* For any new registration, please register on the new forum www.motorcarsoft.com
Click here to register at motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
Tuto Alimentation interface autonome de toute interface de diagnostique automobile
Règles du forum
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
- rgmaster3
- Capitaine Barberousse - Captain Redbeard
- Messages : 9222
- Enregistré le : ven. 29 sept. 2017 21:51
- Réputation : 925
- Localisation : Pirates Island
- A remercié : 561 fois
- A été remercié : 1297 fois
- Sexe :
- Zodiaque :
- Contact :
Tuto Alimentation interface autonome de toute interface de diagnostique automobile
Barbaresques https://fr.wikipedia.org/wiki/Barbaresques
Comment télécharger? / How to download ?
viewtopic.php?f=77&t=1294
Recherche un programme par mots-clés / Search a program by keywords
search.php
Comment s'enregistrer sur le forum ?
How to register on the forum ?
viewtopic.php?f=77&t=296
Signaler un téléchargement ou une vidéo corrompu
Report a corrupted download or video
posting.php?mode=post&f=125
Comment télécharger? / How to download ?
viewtopic.php?f=77&t=1294
Recherche un programme par mots-clés / Search a program by keywords
search.php
Comment s'enregistrer sur le forum ?
How to register on the forum ?
viewtopic.php?f=77&t=296
Signaler un téléchargement ou une vidéo corrompu
Report a corrupted download or video
posting.php?mode=post&f=125
100 derniers membres ayant consulté ce sujet
sr65, NSES, hakkai97480, atlon2, Mika674, tekn95, mahieux, ken2010, brunoche, ozuka, Gd1996, MECA95, rgmaster3, barthdu22, Gorbhy, SATON23, tazinitro, lionheart_tf, KMGAUTO, SIBLASH, darkmile, messaoudi9101984, Remila, justin, AMOzou, tymis3000, saroukh, walid2303, pixelcrea, ayube84, tobani, maravalo31, ramhou, dookati, ilker, samhitinfo, ABIDO, DFL_02, Manu3772, LAROCHE, jacky, louismollo