Activating BMW Online and Internet with Tool32

[Flying_Dutchman]

Tools Required:

- Tool32, which is part of EDIABAS;
- HxD, or any other hex editor you feel confortable with;
- Tools compiled by me to parse the data extracted from Tool32;
- Notepad+, or any other text editor you like in order to make changes to the xml file.

Procedure:

- Start E-Sys, read the CAFD of your NBT unit and with the FDL Editor look for the entry DPAS_INDEX. This will tell you the DPAS value you will have to use with Tool32;

- Start Tool32 and open the NBT.prg (You might need other prg like ENTRYNAV.prg. Find the one the let's you communicate with your ECU.);

- Run the job: apiJob("NBT","lesen_provisioning_data","3;2;0",""). In this case, "2" is the value reported by the entry DPAS_INDEX;

- Run the Application " Windows or Mac " version to parss the file on the correct format

- Open the saved file ;

- Select the data inside the file and copy it in a hexadecimal editor;

- Save as XML file

- Now you have your complete xml file generated;

- Save the new file and note the location. For example: C:\file.xml;

- Edit your file with Notepad+ to activate whatever you like (Examples below);

- Save the changes (Notepad+ will warn you if there are errors with the xml);

- Upload the file to your car, using Tool32, with the command:
apiJob("NBT","steuern_provisioning_data","3;c:\file.xml;2",""). In this case, "c:\file.xml" should be your file and "2" is the value reported by the entry DPAS_INDEX;

If all went well, your car should assume the changes and you will see the new options available in your iDrive.


Section téléchargement, voir en bas de cette page
Download section, see bottom of this page

Télécharger-Download.txt