Problème medianav bloqué sur logo et solution avec Recovery

[Pachi]

bon, s'il vous plaît ami aussi m'aider à aider? mon media nav 4.02, il a démarré dans connect outil de diagnostic et il ne permet pas d'installer dboot, je ne peux accéder à wince, installant switch 1022 et gnd, mais il montre jamais de disque interne. merci

[rgmaster3]

bon, s'il vous plaît ami aussi m'aider à aider? mon media nav 4.02, il a démarré dans connect outil de diagnostic et il ne permet pas d'installer dboot, je ne peux accéder à wince, installant switch 1022 et gnd, mais il montre jamais de disque interne. merci

salut
essais de réparer votre problème avant de sauter à autres chose
réparation erreur "diag tools"
viewtopic.php?f=85&t=66

[Pachi]

Merci, mais je vois que cette fois ne peut pas m'aider, difficile, je peux faire quelque chose du tutoriel qui m'indique, si mon port USB ne reconnaît pas de clé USB, comme je l'ai dit, toute clé avant de rendre clair, a déclaré: multimédia non reconnu) et cela ne change pas après avoir rendu clair vierge, donc il ne reconnaît toujours pas de clé USB qui est placée.
Merci quand même..

[rgmaster3]

Salam.
Le bootloader est installer dans ce medianav bloquer ?

[mokhtar13]

السلام عليكم ممكن حل لديا ميديا ناف مبلوكي على
Logo
ممكن ملفات الممكنة وشكرااا
4.0.6

[rgmaster3]

salut, désolé mais il faut une donation pour avoir l’accès aux téléchargements viewtopic.php?f=77&t=1294

[heavykill]

graciass

[rgmaster3]

Hello. you have to be a donor for download access

[anko]

@rgmaster3.
Last week I bought a Renualt Captur of 2014. Because the Medinav has old maps I wanted to update these.
Then I found that the version of my medianav is 4.0.6 and I wanted to upgrade it in the official way.
There I went stuck.

When I put the USB back in the Medinav, after using the official Renault toolbox, Igo to the update again and start updating.
Two hours later (with running engine) nothing happend.

After some searching I came to this post, which seemed to have the solution.
So I downloaded the file "renault.naviextras.com/..../OS_warning" and also tried the file "mega.nz/#..........MxON5adEgSZUQDqQzC11FSgEs" as linked to in your text file.
According to the PDF manual it should work very simple.
But, as you guess, not for me.

Medianav simply does not seem to read the USB from start. Only when I go to navigation->options->map update, medianav finds the usb.
But then, it acts like there is just the regular upgrade.lgu and starts updaten, which does not work.

Next friday I have an appointment whit my renault garage to do the upgrade from 4.0.6 to 4.1.0, but I prefer to do it on my own.

In my search, I also did see you active with medianav plus om mondoduster.it.
Would it be possible to use that instead of this upgrade?
As far as I understand it should be possible to use it on 4.0.6. So maybe that is a solution.
With free TomTom cards as an extra.

From Medinav plus I also went to favremod.
Is that another option?

Many thanks in advance

[Neek]

@Anko, your unit being quite old, most probability you have problem with NAND memory.
Start to check over here:
viewforum.php?f=85
most probability here:
viewtopic.php?f=85&t=197
RGMaster will indicate more precise the location.
You have to try get in WinCE with NK.bin (if doesn't want normally, try to force with method of bridge to GND) That works for sure.
Once get in WinCE check if you have to check if still you see the 4 folders Storage Card. If you see it, you are a little bit lucky. You have to delete and put a backup from working version in Storage Card and Storage Card4, usually minimum version 4.0.6. Restart and check if works.

If you don't find the 4 folders is bad luck, but you still can try restart and check again few times. If still doesn't want show those 4 folders Storage Card you have to change the main board.

In last time I have changed a lot of boards on MN1 Standard, even direct upgrade to Evolution, because can't find anymore MN1 boards.